Exitile Ltd

Airtight | AT PF SW

Product Code: EX/AT/PF/SW

Specification

Construction: Picture frame with Metal door
Orientation: Wall
Fire Rating: 120 minutes
Acoustic Rating: Not Rated

Data Sheet

Intro

Suitable for use in any type of 2 hour fire rated wall/ceiling system within a building that requires some form of containment, e.g. computer rooms, hospital wards, swimming pools etc.

Description

This panel is supplied with a picture frame surround to enable it to be inserted into a pre-cut hole in any type of wall/ceiling system and comes complete with a fully removable flush metal door. This is a 2 Hour Fire Rated Access Panel which has been tested to B.S.476: Part 22:1987.

Construction

Constructed from 1.2mm and 1mm thick Zintec Steel, with a polyester powder coating of matt white Ral 9010, 20% Gloss (other colours available upon request). The panels are also available in Stainless Steel for use in corrosive areas (quote using product code and ref SS). The removable flush metal door is filled with Rockwool insulation and sealed with a fire-resistant board and rear protection plate. The door is secured using a three point locking system and is fully sealed at the rear with an arrangement of silicone and intumescent seals.

Dimensions

Any panel sizes can be manufactured to order within maximum and minimum dimensional constraints. For further information please contact our Technical Sales Department.

Fitting

The access panel should be screw fixed through the side of the panel frame, and will require independent bracing and support which is sufficient to secure and also allow safe opening of the access panel within the wall/ceiling system. When installing the access panel, the actual size of structural opening in the ceiling/wall needs to be +10mm greater than the overall panel dimension e.g. structural opening for 600mm x 600mm will be 610mm x 610mm.